Key Takeaways
- A double-decker stall adds an upper level on the same footprint, usually for meetings, hospitality or a lounge, and makes the stall visible from across the hall.
- It makes sense on larger bare-space plots when you need private meeting space and visibility, not on small plots or when time is short.
- Organisers usually approve double-deckers separately and may ask for structural drawings, safety certificates and additional upper-floor charges.
- Start 10 to 12 weeks before the show, because design, approvals, engineering and fabrication all take longer than for a single-level stall.
- Plan staircases, load limits, railings, lighting and accessibility as carefully as the branding.
At large exhibitions, the stalls that dominate a hall are often the ones that go up rather than out. A double-decker exhibition stall adds a second level on the same floor area, giving you room for private meetings, hospitality or a lounge upstairs while the ground floor stays open for products and visitors.
Two levels also bring more engineering, more approvals and more time. This guide explains when a double-decker stall is worth it, how organisers usually treat them, what to plan for structurally and how to set a realistic timeline.
What Is a Double-Decker Exhibition Stall?
A double-decker (or two-storey) stall has a ground floor and an upper deck reached by a staircase inside the stall. A typical arrangement is:
- Ground floor: product display, demonstrations, reception and quick conversations with walk-in visitors.
- Upper deck: meeting rooms, a client lounge, hospitality, or a viewing area overlooking the hall.
- Under the deck: storage, a pantry or AV control, hidden from visitors.
Because the structure is taller than surrounding stalls, the fascia and branding on the upper level can be seen from far across the hall.
When Does a Double-Decker Make Sense?
A double-decker is usually worth considering when:
- You need meeting space but floor area is expensive or limited. The upper level adds usable area without booking a bigger plot.
- Your business is built on meetings, such as dealer networks, export buyers or large project clients who expect a quiet place to talk.
- Visibility matters in a very large hall, for example at national fairs where hundreds of stalls compete for attention.
- You are launching something, and a landmark stall supports the launch.
- You exhibit at the same show every year and want a consistent, recognisable presence.
It is usually not the right choice when:
- The plot is small, or the organiser does not allow double-deckers on your plot type.
- Time is short. A double-decker needs a longer lead time than a single-level stall.
- The upper deck would be mostly empty. Meeting space nobody uses is an expensive way to add height.
- Your products need most of the attention at ground level and a tall logo tower or hanging banner would give enough visibility.
Our guide on choosing the right stall size and the overview of types of exhibition stands in India will help you compare options.
How Organisers Usually Treat Double-Decker Stalls
Rules vary by show and venue, so always check the exhibitor manual. Common conditions include:
- Bare space only. Double-deckers are generally allowed only on raw-space plots, often above a minimum size.
- Separate approval. The organiser reviews the design separately from standard stalls, with an earlier deadline.
- Structural drawings and certification. Many shows ask for structural drawings and a certificate from a qualified engineer, and may inspect the structure before the show opens.
- Upper-floor charges. Some organisers charge additional rent for the upper deck area.
- Height and setback limits. The total height, the upper deck's position and its distance from neighbouring stalls are usually specified.
- Use of the upper deck. There may be limits on the number of people allowed upstairs at a time, and on what can be placed there.
Our guide to the exhibition stall approval process explains the documents and deadlines in more detail.
Structural and Safety Planning
A double-decker is a temporary building, and it has to be designed like one.
- Load on the upper deck. The structure must safely carry people, furniture and any equipment upstairs. The engineer calculates this and sets a maximum occupancy.
- Columns and footprint. Supporting columns take up ground-floor space. Plan them so they do not block product displays or sightlines.
- Staircase. Stairs need comfortable width and step height, handrails and a sensible position that does not split the ground floor awkwardly. Some exhibitors use two staircases for flow.
- Railings and edges. Upper-deck edges need railings of a safe height. Glass railings look open, but must be the right type and properly fixed.
- Floor and ceiling finishes. The underside of the deck becomes the ground-floor ceiling, so plan lighting, ventilation and finishes for it.
- Fire safety. Materials, wiring and fire extinguishers must meet the manual's requirements on both levels.
- Accessibility. If some visitors cannot use stairs, plan a ground-floor meeting area as well.
Designing the Two Levels
A good double-decker design gives each level a clear purpose.
Ground Floor
- Keep it open and inviting, with products and demos visible from the aisles.
- Place the reception near the staircase, so staff can guide guests upstairs.
- Use storage under the deck to keep the display area uncluttered.
Upper Deck
- Plan meeting rooms or a lounge based on how many meetings you expect at once.
- Balance privacy and openness: partial walls, frosted glass or slatted partitions keep conversations private without making the deck feel closed.
- Add hospitality points, such as a coffee counter or water station, so staff do not have to go up and down.
- Make sure lighting, power points and air circulation are planned upstairs, since halls can get warm near the roof.
Branding
- Use the upper deck's outer faces for large branding visible from far away.
- Keep the message simple: brand name and one clear line work better at that height than detailed text.
- Light the upper branding so it stays visible in darker halls.
Our articles on using lighting to make your stall more attractive and creating private meeting areas are useful when planning the upper deck.
Timeline for a Double-Decker Stall
| Weeks before the show | What happens |
|---|---|
| 12–14 | Confirm the plot, request the exhibitor manual, check double-decker rules |
| 10–12 | Brief your designer; agree what each level is for |
| 8–10 | Approve the 3D design; engineering and structural drawings begin |
| 7–8 | Submit drawings, certificates and contractor details to the organiser |
| 4–6 | Organiser approval; finalise changes; fabrication starts |
| 1–3 | Fabrication, trial assembly of key parts, graphics and AV |
| Build-up | Installation, safety inspection, handover |
For a custom single-level stall, six to eight weeks can be enough. For a double-decker, 10 to 12 weeks is safer, mainly because of approvals and structural work.
What Drives the Cost of a Double-Decker?
We do not quote a standard price for double-deckers, because every one is different. The main cost drivers are:
- Plot size and upper-deck area, including any upper-floor charges from the organiser.
- Structure and engineering, including steel or aluminium framing, certification and inspection.
- Staircases, railings and glass, which add materials and fabrication time.
- Finishes and lighting on both levels, including the ceiling under the deck.
- Furniture and hospitality on the upper deck.
- Transport and installation time, since double-deckers usually need larger crews and longer build-up.
- Reuse. A structure designed to be stored and reused at other shows costs more once but less over several events.
Our exhibition stall cost guide explains how fabrication prices are built up, and our questions to ask a fabricator will help you compare quotations.
Common Mistakes With Double-Decker Stalls
- Starting too late, which leaves no time for approvals and engineering.
- Designing before checking the manual, then discovering the plot does not allow a second level.
- An under-used upper deck, built because it looks impressive rather than because meetings need it.
- Poor staircase placement that blocks the ground floor or creates a bottleneck.
- Forgetting the ceiling under the deck, which leaves the ground floor dark and unfinished.
- No plan for visitor access, so guests wander upstairs uninvited. Decide who is allowed up and who will manage it.
Frequently Asked Questions
What is a double-decker exhibition stall?
It is a stall with two levels: a ground floor for display and visitors, and an upper deck reached by a staircase, typically used for meetings, hospitality or a lounge.
Do I need special approval for a double-decker stall?
Usually yes. Organisers generally review double-deckers separately and may ask for structural drawings, engineer certification and additional upper-floor charges. Check the exhibitor manual for your show.
How early should I plan a double-decker stall?
Start 10 to 12 weeks before the show, and earlier for very large builds. Approvals and structural work take longer than for a single-level stall.
Can a double-decker stall be built on a shell scheme plot?
No. Double-deckers are built on bare-space plots, usually above a minimum size set by the organiser.
Can a double-decker stall be reused?
Yes, if it is designed for reuse from the start, with a structure that can be dismantled, stored and rebuilt. Graphics and finishes can then be refreshed for each show.
Planning a Double-Decker? Talk to Connectbase
Connectbase Communications has been designing and building exhibition stalls since 2009, including custom double-decker pavilions for large shows. We prepare the 3D design, drawings for venue approval, fabrication in our own workshop, and installation and dismantling with our own crew.
Share your show, plot size and what you need the upper deck for, and we will advise whether a double-decker is the right choice. See our 3D stall design and stall fabrication services, or contact us for a stall design quotation.


